Dulux Once Satinwood Paint For Wood And Metal – Natural Calico 750ml

Dulux Once Satinwood Paint For Wood And Metal – Natural Calico 750ml
Dulux Once Satinwood has been specially formulated to give a perfect satin finish on interior primed or painted wood or metal surfaces in just one coat. It does not require an undercoat.

Application Description:
Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.

Tips & Advice:
1. Preparing the Surfaces
Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry.
2. Cleaning
For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
3. Storing
Store paint in dry conditions and protect from extreme temperatures.

Finish – Satin
Coverage – Up to 12m2/litre
Drying Time – Leave for 16 hours to dry. TIP: Newly painted doors and windows should not be closed and radiators should not be heated until paint is fully dry.
Coats – 1